Developed
by

Great Planes Spirit Elite

by Klaus Weiss..........reviewed 12/99

Heathcote Soaring League

RADIO INSTALLATION

Mini servos fit o.k. in the fuselage, so fasten them to the basswood servo rails and work out the correct lengths for the nylon pushrods. Make sure nothing is binding during operation.

The wing servos need to be micros, or purpose designed wing servos, to fit inside the wings. The mounting blocks are required to be glued to the servo cover plates. An easy job. I used button head screws to attach the covers, as they look neater. Use the same servo brands and models for the wings, as you don't want any great variance in throws or speed.

I will not go into the setups for computer radios, but the control surface throws listed in the instruction booklet, are always a good starting point.